Linux硬盘分区生效命令partprobe

　　在Linux中使用fdisk命令进行分区时，有时会遇到“WARNING: Re-reading the partition table failed

　　with error 16: Device or resource busy.The kernel still uses the old table.The

　　new table will be used at the next reboot.”这种告警信息。如下所示

　　[root@localhost ~]# fdisk /dev/sde

　　The number of cylinders for this disk is set to 18928.

　　There is nothing wrong with that, but this is larger than 1024,

　　and could in certain setups cause problems with:

　　1) software that runs at boot time (e.g., old versions of LILO)

　　2) booting and partitioning software from other OSs

　　(e.g., DOS FDISK, OS/2 FDISK)

　　Command (m for help): p

　　Disk /dev/sde: 155.6 GB, 155692564480 bytes

　　255 heads, 63 sectors/track, 18928 cylinders

　　Units=cylinders of 16065 * 512=8225280 bytes

　　Device Boot Start End Blocks Id System

　　/dev/sde1 1 18275 146793906 5 Extended

　　/dev/sde5 1 18275 146793874+ 83 Linux

　　Command (m for help): n

　　Command action

　　l logical (5 or over)

　　p primary partition (1-4)

　　p

　　Partition number (1-4): 2

　　First cylinder (18276-18928, default 18276):

　　Using default value 18276

　　Last cylinder or +size or +sizeM or +sizeK (18276-18928, default 18928):

　　Using default value 18928

　　Command (m for help): w

　　The partition table has been altered!

　　Calling ioctl() to re-read partition table.

　　WARNING: Re-reading the partition table failed with error 16: Device or

　　resource busy.

　　The kernel still uses the old table.

　　The new table will be used at the next reboot.

　　Syncing disks.

　　此时使用fdisk命令看不到新建的分区信息，可以使用partprobe命令解决这个问题而不用重启系统，因为partprobe可以使kernel重新读取分区信息，从而避免重启系统。

　　partprobe – inform the OS of partition table changes

　　DESCRIPTION

　　This manual page documents briefly the partprobe command.

　　partprobe is a program that informs the operating system kernel of partition

　　table changes, by requesting that the operating system re-read the partition

　　table.

时间：(2024-02-07 14:24:11)
本站资源均来自互联网或会员发布，如果不小心侵犯了您的权益请与我们联系。我们将立即删除！谢谢！